beautypg.com

Allied Telesis AT-GS950/24 User Manual

Page 27

background image

AT-GS950/24 Web Interface User Guide

27

System Default Gateway - Displays the default gateway of the
switch. To change the default gateway, enter a new gateway.
When DHCP is enabled, you cannot change this parameter.

DHCP Mode - For information about setting this parameter, refer to
“DHCP Client Configuration” on page 35.

4. Click Apply.

Note

Changing the IP address ends your management session. To
resume managing the device, enter the new IP address of the switch
in the web browser’s URL field, as shown in Figure 1 on page 20.

5. After you log on to the switch with the new IP address, select Save

Configuration to Flash from the main menu on the left side of the
page to save the new IP address to memory.

Caution

If you do not select Save Configuration to Flash, the IP address
will revert to its original setting when you power cycle or reboot the
switch.