Allied Telesis AT-GS950/24 - Manual (Page 283)

AT-GS950/24 Web Interface User Guide
283
5. Enter the Write View Name.
This name is an optional field. It can be up to 31 characters in length.
6. Enter the Notify View Name.
This name is an optional field. It can be up to 31 characters in length.
7. From the Security Model pull-down menu, select v3.
8. Enter the Security Level from the pull-down menu. The selection
options are:
NoAuthNoPriv - This selection is the appropriate selection
when no Auth-Protocol or Priv-Protocol (no encryption) are
selected on the SNMP User/Group page.
AuthNoPriv - Choose this selection when encryption has been
enabled but only the Auth-Protocol has a password assigned and
the Priv-Protocol has been selected as none on the SNMP User/
Group page.
AuthPriv - When both the Auth-Protocol or Priv-Protocol have
been enabled, choose this selection.
9. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.
Modify SNMPv3
View Names
If you need to modify an entry in the SNMP Group Access page, you must
first delete the entry and then re-enter it. For information about how to
delete an entry in this table, see “Delete SNMPv3 View Names” on
page 283. For information about how to create a new entry in this table,
see “Create SNMPv3 View Names” on page 282.
Delete SNMPv3
View Names
This procedure explains how to delete an entry on the SNMP Group
Access Table page.
1. From the main menu on the left side of the page, select the SNMP
folder.
The SNMP folder expands.
2. From the SNMP folder, select SNMP Access Table.
The SNMP Group Access Table page is displayed. See Figure 100 on
page 282.
3. In the Action column of the table, click Delete for the View Name that
you want to remove.
Note
The views corresponding to the ReadOnly and ReadWrite Group
Names are default values and cannot be removed.