Allied Telesis AT-GS950/24 - Manual (Page 219)

AT-GS950/24 Web Interface User Guide
219
Note
An error message is generated when you enter a VLAN ID or VLAN
Index which is not been defined or when you enter a
VLAN ID or VLAN Index without also clicking on the respective
radio button.
4. In the Group MAC Address field, enter a unicast MAC address.
5. Assign the MAC address a Port Member (or members) by selecting
the check box beside each port number.
Note
You can assign a maximum limit of 256 static unicast addresses on
the switch.
6. Click Add.
The Static Unicast Address Table is updated with the new MAC
Address.
7. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.