Allied Telesis AT-GS950/24 - Manual (Page 187)

AT-GS950/24 Web Interface User Guide
187
2. From the Access Control Config folder, select Profile Action.
An example of the Create Profile Action page with a Profile Action
table entry is shown in Figure 64 on page 187.
3. Select the table entry that you want to modify and click the modify link
in the Action column.
The Modify Profile Action page will be displayed. See Figure 64 on
page 187
Figure 64. Modify Profile Action Page
4. Change the parameters as required.
Note
See “Create Profile Action” on page 185 for the definitions of each
parameters.
5. Click Apply.
The modified profile action entry is displayed in the table at the bottom
of the page of the Create Profile Action page.
6. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.
Delete Profile
Action
To delete a profile action entry, perform the following procedure:
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select Profile Action.
An example of the Create Profile Action page with a Profile Action
table entry is shown in Figure 64.
3. From the Create Profile Action page, identify which profile action table
entry that want to delete and click the Delete button in the Action
column.
You will be prompted with a message saying, “Do you want to delete
Profile Action xx?” (where xx is the classifier index).