Allied Telesis AT-GS950/24 - Manual (Page 91)

AT-GS950/24 Web Interface User Guide
91
Port-Based VLAN Configuration
A port-based VLAN is a group of ports on the switch that form a logical
Ethernet segment. This type of VLAN is independent of the header
information including VLAN tags in a frame.
You can create and delete Port-Based VLANs by following the procedures
in the following sections:
 “Create a Port-Based VLAN”
 “Modify a Port-Based VLAN” on page 92
 “Delete a Port-Based VLAN” on page 92
Create a Port-
Based VLAN
To create a port-based VLAN, perform the following procedure:
1. From the main menu on the left side of the page, select Bridge.
The Bridge folder expands.
2. From the Bridge folder, select VLAN.
The VLAN folder expands.
3. From the VLAN folder, select Port-Based VLAN.
The Port-Based VLAN Page is displayed. See Figure 29.
Figure 29. Port-Based VLAN Page
4. To assign a VLAN Index, type a VLAN ID in the VLAN Index field.
Choose a value between 1 and 64.
5. To assign a name to a VLAN, type a name in the VLAN Name field.
Enter a value of up to 32 characters. For more information about this
field, refer to “VLAN Name” on page 77.
6. To assign ports to the VLAN, click on the port numbers labeled Group
Member.