Allied Telesis AT-GS950/24 - Manual (Page 101)

AT-GS950/24 Web Interface User Guide
101
equation:
GARPLeaveAllTimer > (GARPLeaveTimer + 10)
Note
To ensure compatibility between network devices, you need
to configure the same values for the GARP Join Timer, GARP Leave
Timer, and GARP Leave All Timer on all participating GVRP devices
in your network.
5. Once you have configured the parameters, click Apply for the affected
port.
6. If you want to configure the GVRP timers for other ports, repeat
steps 4 and 5.
7. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.