Horner APG QX751 OCS - Manual (Page 41)

MAN0890-02-EN CH. 9
August 20, 2009 Page 41 of 96 ECN # 979
CHAPTER 9: SYSTEM SETTINGS AND ADJUSTMENTS
9.1
System Menu - Overview
The QX-751 controller has a built-in System Menu, which lets the user view System Settings and make
adjustments. To start the System Menu, press the SYSTEM keys at the same time (or set %SR3 to 1),
which will display the Main Menu, as shown in Figure 9.1. Then use the
↓ and ↑ keys to select a Main
Menu item and press Enter to display the item’s Sub-Menu.
Ba
Figure 9.1 – System Menu
Network Ok? Yes
Network ID: 253
Network Baud: 125 KB
( Use
↓↑ to adjust )
Contrast:
( No Adjustment )
( on this model )
Sub-Menus
Model: QX751
OR
Model: QX751BP43 or 41
Mode: Idle
Scan Rate(mS): 7.0
LcL Net Use(%): 0.0
All Net Use(%): 0.0
Ladder Size: 33503
Config Size: 128
Graphics Sz: 68196
String Size: 52976
Bitmap Size: 381743
Text Tbl Size: 28
Font Tbl Size: 2258
Protocol Size: 16
SMS File Size: 8
Firmware Rev: 12.39
BIOS Rev: 0.05
FPGA Rev: 2.9
Self-Test:
Ok
Logic Error: Ok
User Program: Ok
User Graphics: Ok
W-Dog Trips: 0
Net Errors: 0
Network State: Ok
Network ID: Ok
Dup Net ID: Ok
Clock Error: Ok
I/O System: Ok
Battery:
Ok
Base Selected: CPU
Base Online? Yes
Slot 1:+I/O: FOX100
Slot 2:+I/O: ETN300
Slot 3:+I/O: HSC501
Slot 4: I/O: Empty
Set Network ID
Set Network Baud
Set Contrast
View Status
View Diags
View I/O Slots
View Protocols
Set Fkeys Mode
Set Time/Date
Set Beeper
Set Screen
Removable Media
Fail-Safe System
Clone Unit
(ESC to Exit)
Main Menu
Port 1:
(None Loaded)
Port 2:
(None Loaded)
Port 3:
(None Loaded)
Sub-Menus
Fkeys: Momentary
Sys-Fn enable: Yes
( Use
↓↑ to adjust )
Time: 19:50:36
Date: 26-Dec-2008
Day: Friday
( Use
↓↑ to adjust )
( each field )
Saver enable: Yes
Timeout(min): 15
Popup Status: Off
Update Time(mS): 10
Update time sets
the maximum time
used by graphics
in the logic scan.
Media Directory
Media Card Not Present
Note: The
QX751display shows up to
15 lines of text at a time.
For System Menu screens
that contain more than 15
lines of text, use the
↓ and
↑ keys to scroll the display.
Beeper enable: Yes
( Use
↓↑ to adjust )
Base Selected: CPU
Base Online? Yes
Slot 1: I/O: FOX100
Slot 2: I/O: ETN300
Slot 3: I/O: HSC501
Slot 4: I/O: Empty
or
Backup/Restore Data
Enable AutoRun
Enable AutoLoad
(ESC to exit)
Clone Unit
Directory Empty