Horner APG QX751 OCS - Manual (Page 14)

CH.2 MAN0890-02-EN
August 20, 2009 Page 14 of 96 ECN # 979
c. Cscape Software
QX751 hardware is programmed with a Windows-based PC application called Cscape
(HE500OSW232). Cscape (pronounced “see-scape”) stands for Control Station Central
Application Programming Environment. Provided there is one serial connection to one node on
the network (i.e., CsCAN Network), the operator has control over the entire system. The operator
can upload, download, monitor and debug to any node on the network.
This application can be used to program, configure, monitor and debug all aspects of the OCS. It
is used for programming QX751 OCS ladder logic, programming user displays for the QX751
OCS, configuring the network for global digital and analog data, setting system-wide security and
monitoring controllers in the system.
2.3.2 Back Pack I/O Interface (BP41, BP43)
The Back Pack I/O Interface (BP) adds comprehensive I/O functionality to the QX751. The BP
uses a
Fiber Optic Extension System ( FOX) to extend a high-speed QX751 backplane in a CsCAN
network and enables SmartStack I/O Modules to be mounted several meters from the QX751.
The FOX significantly increases the number of SmartStack I/O modules supported by one
QX751. Remote SmartStix I/O can also be used. When using BP43, an additional High Speed
I/O function is provided.
2.4
Product Specifications (QX751 and Back Pack)
Product Specifications are covered in the datasheet sent with the product in the box.
2.5
Required and Suggested Accessories
The following list contains a sampling of required and suggested QX751 accessories. Visit our website to
view updates on new products and accessories.
Note: The QX751 is not shipped with a programming cable in the box. To obtain a programming
cable, order HE500CBL300.
Table 2.2 – QX751 accessories
Part Number Description
HE500OSW232
Cscape Software Package. Includes Cscape CD, 9-pin OCS Programming Cable, RJ-
45 Programming Cable, Documentation
HE500CBL300 OCS Programming Cable, 9-pin female (PC) to RJ-45 (OCS) - 6 feet.
2.6
Useful Documents and References
The following information serves as a general listing of Horner controller products and other references of
interest with their corresponding manuals numbers. Visit our website to obtain user documentation and
updates.
The following information serves as a general listing of Horner controller products and other references of
interest and their corresponding manuals numbers. Visit our website listed in the Technical Support
section to obtain user documentation and updates.