Horner APG QX751 OCS - Manual (Page 11)

MAN0890-02-EN CH. 2
August 20, 2009 Page 11 of 96 ECN # 979
CHAPTER 2: INTRODUCTION
2.1 Visual
Overview
The QX751 OCS provides flexible options allowing you to choose the functionality you need. A QX751
Base can be used alone or it can be used with a Back Pack I/O Interface (BP).
001QX010
LAN CN1 MJ1 MJ2 U-B U-A
CF
CN7
3.95”
[100.3mm]
15.07”
[382.7mm]
12.31”
[312.7mm]
3.19”
[81.1mm]
Figure 2.1 – Visual Overview of QX751 and Back Pack
Table 2.1 – QX751/BP Product Features
QX751 Base Model
Loaded with Back
Pack Capable
Firmware
Network Screen Type
Standard QX751
Features
HE-QX751 Yes
On-Board
Ethernet
100BaseT
1024x768 15” TFT XGA
with 32,768 colors
CompactFlash
TM
3 Serial Ports
Ethernet
USB B
(version 1.1)
Optional Back Pack (BP) Features
Revision G of the backpack is required
HE-BP41 FOX, CsCAN, Up to 2 Plastic SmartStack Modules (for additional I/O)
HE-BP43
FOX, CsCAN, Up to 4 Plastic SmartStack Modules (for additional I/O), High Speed
I/O (HSC / PWM)
Back Pack Options (BP)
Optional interface that adds comprehensive
I/O functionality to the QX751.
NOTE: Revision G of the back pack is required for HE-QX751, due to mechanical interference
previous versions will not install correctly.