Horner APG QX751 OCS - Manual (Page 33)

MAN0890-02-EN CH. 7
August 20, 2009 Page 33 of 96 ECN # 979
5.
The Module Configuration Screen appears. Two tabs are available for selection:
Figure 7.7 – I/O Map Tab
a.
I/O Map Tab
The I/O Map describes the I/O registers assigned to a specific I/O module. Although there are no user-
defined parameters, the I/O Map can be viewed after the SmartStack module is configured to review the
registers.
• Model number
Provides the part number.
• Description
Describes the number of input and output channels and other key
characteristics of the module.
• Type:
Displays the register types assigned to the module.
• Starting Location: Denotes the starting location of the register type.
• Ending Location:
Denotes the ending location of the register type.
• Number:
Indicates the quantity of a particular register type.
Note: Do not confuse the described number of input and output channels with the numbers found in the
Type column (i.e., %I and %Q). The numbers do not necessarily match.