AMETEK 1986XPJ Explosion Proof Resolver - Manual (Page 68)

68 1080 N. Crooks Road • Clawson, MI 48017 • 800.635.0289 • 248.435.0700 • Fax 248.435.8120 • www.ametekapt.com
AUTOMATION & PROCESS
TECHNOLOGIES
Misc.
Use mounting kit No. 949-003 which includes the
head “L” bracket (M0748600) and the probe support
bracket (SD0411200). The magnet support bracket
includes the magnet “L” bracket and hardware.
It is important to use the mounting kit hardware
provided, or to follow the instructions below. The
magnet is sold separately. In instances where
the magnet will be mounted to a ferrous surface,
spacers manufactured of non-ferrous materials,
such as stainless steel, nylon, etc. should be used.
The spacer should be designed in such a way that
any ferrous surface is no closer than 0.25” from the
magnet. Ferrous material within 0.25” of the magnet
will distort the magnetic flux and adversely affect the
unit’s operation.
1.00 2.00
2.00
.28 X .75 SLOT
.50
.50
.88
1.91
NOTE: WHEN USING ROD SUPPORTS USE MAGNET P/N SD0411200
90 –1/4
2.00
1.00
2.00
.766 THRU
.25 REF.
2.00 REF.
3.00 REF.
.37 1.25
.62
1.00 .28 THRU
.19 MIN.
2 PLACES
90 –1/4
2.00
1.00
2.00
.56 THRU
.25 REF.
2.00 REF.
3.00 REF.
.37 1.25
.62
1.00 .28 THRU
.19 MIN.
.469
.937
#6-32 THRU 2 PLACES
2 PLACES
BAND
OPTIONAL
MAGNET
NULL STROKE DEAD
1.75 HEX
MAGNET MOUNTING
KIT (P/N 949005)
PROBE MOUNTING KIT
(P/N 949003)
2.00
2.00 3/4-16 JAM NUT
SUPPLIED W/PROBE
1.00
1.03
.28 X 1.03 SLOT
1.00
.44
1.25
2.00
.28
2 PLACES
2.00
1.25
1.00
2 PLACES
.28
.62
PROBE
3/16" X 2" X3" STAINLESS STEEL .
2. MOUNTING BRACKETS ARE MADE FROM
MOUNTING BOLTS.
1. MOUNTING KITS FURNISHED WITH
NOTES: UNLESS OTHERWISE SPECIFIED
CL
.37
Typical Installation