AMETEK Over Temperature Protection User Manual
Motogard
Motogard
Series 150
CONNECTIONS
Power Connections:
Connect 120/240 VAC to input terminals 1 and 2.
Sensor Connections:
1.
Connect one lead of each thermistor to Terminal 3.
2.
Connect other lead of each Thermistors in series through to Terminal 4.
3.
Maximum number of Thermistors in series: Three (3)
Output Load Connections:
1.
Terminals 5, 6 and 7 comprise a set of “form C” contacts with terminal 6 common.
Terminal 5 is the open side. Terminal 7 is the closed side.
2.
Be sure power is never applied directly across contacts but always in series with a load.
3.
Maximum allowable load - 5 amps at 115 VAC
4.
The closed output of the Motogard Over Temperature Protection System has been
specifically designed to operate directly in series with most main line contactors. If a small
interposing relay must be used, the sealed burden should be greater than 10VA.
5.
The open output of the Series “150” controller can be used for trip indication.
See opposite side for possible wiring option.
- 925 Linear Cable Reel Sensor (8 pages)
- 925 Linear Cable Reel Sensor (1 page)
- 925 Linear Cable Reel Sensor (2 pages)
- 955C Brik (71 pages)
- 950 MD Mill Duty Housing LDT (10 pages)
- 952 BlueOx LDT (36 pages)
- 953 VMAX LDT (18 pages)
- 955 eBrik (6 pages)
- 955 eBrik (2 pages)
- 955A Brik LDT (4 pages)
- 955D LDT (12 pages)
- 955DQ Brik LDT (24 pages)
- 955LC Brik LDT (1 page)
- 955S Smart Brik LDT (8 pages)
- 956 Blok Housing Option (2 pages)
- 957 SSI Brik (20 pages)
- 1970 Drive Check Control (4 pages)
- 1980 Rotating Cam Limit Switch (20 pages)
- 1980R Rotating Cam Limit Switch w/Resolver (20 pages)
- 1986 DN DeviceNet Resolver (20 pages)
- 1986I 4 (2 pages)
- 7014 Unifloat Level Float Sensors (4 pages)
- 7230 HT Digital Probe (2 pages)
- 7230 HT Digital Probe (25 pages)
- 7330 Pro-Stik II (12 pages)
- 7330 Pro-Stik II (2 pages)
- 7100 Leak Detect Stik (4 pages)
- 7100 Leak Detect Stik (22 pages)
- 7250 Digital Stick (2 pages)
- 7250 Digital Stick (11 pages)
- 1500 Induction Style Relay (6 pages)
- 5200 Solid State Relay (4 pages)
- 5400 Plug In Style Solid State Relay (2 pages)
- Electro-Thrust Shoe Brakes (2 pages)
- 1746 LDT Interface Card (24 pages)
- 1746 LDT Interface Card (28 pages)
- 1746 LDT Interface Card (2 pages)
- 1990 DN DeviceNet Resolver Interface Module (20 pages)
- 1995A Micro-Set PLS (38 pages)
- 1995B Micro-Set PLS with Brake Monitor (40 pages)
- 1995L Micro-Set PLS (33 pages)
- 2110 Shut Height Monitor (59 pages)
- 2120 PLC Interface Module (64 pages)
- 1025 Foot & Palm Switches (24 pages)