AMETEK 1986XPJ Explosion Proof Resolver - Manual (Page 22)

22 1080 N. Crooks Road • Clawson, MI 48017 • 800.635.0289 • 248.435.0700 • Fax 248.435.8120 • www.ametekapt.com
AUTOMATION & PROCESS
TECHNOLOGIES
952
Wiring Diagram
BLUE
WHITE
GRAY
PURPLE
BLACK
RED
-INTERROGATION
+GATE
+INTERROGATION
-15 VDC FOR BIPOLAR
POWER SUPPLY
+15 TO +26 VDC
BROWN
-GATE
PIN-OUT FOR STANDARD
CIRCULAR CONNECTOR
AT TRANSDUCER HEAD
GREEN
ORANGE
YELLOW
NO CONNECTION
NO CONNECTION
NO CONNECTION
POWER SUPPLY
COMMON
PIN- C
PIN- B
PIN- J
PIN- K
PIN- A
PIN- F
PIN- E
PIN- D
PIN- G
PIN- H
POWER SUPPLY*
* FOR UNIPOLAR POWER SUPPLY, IT IS RECOMMENDED
TO CONNECT THIS WIRE TO POWER SUPPLY COMMON
Note 1: On unsupported stroke lengths greater than
4 feet, rod support bracket(s) and a special magnet
should be used.
Note 2: Specify as magnet separate line item
(standard magnet is SD0400800).
Part Numbering
952VP 0120
Stroke Length
Insert stroke length to 0.1 inch. Enter as
a four-place number. Example: A 12.0”
stroke enters as 0120. To convert metric
strokes, multiply millimeter value by
0.03937 for inch value.
E X X
Null Zone
X Standard 2 inches.
N_
Insert non-standard Null Zone over
2 inches. (Add non-standard portion
of Null length to stroke length to
calculate list price)
Connector Option
E Environmental MS connector*
C_
Potted pigtail cable assembly, insert
pigtail length in feet. Example: C6 = 6
foot cable.
T
Threaded metal connector
(fits MTS - “RB” on Tempo II TM or III)
Consult factory for other connector options.
Dead Band
X Standard 2.5 inches.
D_
Insert non-standard Dead Band over
2.5 inches. (add non-standard portion
of Dead Band length to stroke length
to calculate list price)
* If option E (environmental connector) is selected, mating
connector and/or cable assembly must be ordered separately.
Variable Pulse
BlueOx
I
Interrogation Mode
I Internal Interrogation
E IExternal Interrogation
001
Recirculations Required
001 (standard) to 127
952VP BlueOx