Red Lion TCU - Manual (Page 99)

91
DESCRIPTION PART NUMBER
Relay Module OMD00000
Triac Module OMD00001
Logic/SSR Drive Module OMD00003
45 A Single Phase Panel Mount Solid State Relay RLY50000
25 A Single Phase DIN Rail Mount Solid State Relay RLY60000
40 A Single Phase DIN Rail Mount Solid State Relay RLY6A000
25 A Three Phase DIN Rail Mount Solid State Relay RLY70000
50:0.1 Ampere Current Transformer CT005001
40: 0.1 Ampere Current Transformer CT004001
Note: Output Modules are NOT supplied with the controller. When specifying the controller, be sure to purchase the
appropriate output module for the Main Control Output and if necessary, the alarm output(s), the cooling output, and
valve positioner outputs. The controller can be fitted with any combination of output modules.
The Logic/SSR Drive Module is a switched DC source, intended to drive the DC input of an SSR power unit. It should
never be connected to line voltage.
All modules are packaged separately and must be installed by the user.
NEMA
4X/IP65
BEZEL
4 to 20 mA
ANALOG
OUTPUT
0 to 10 VDC
ANALOG
OUTPUT
ALARM
OUTPUTS
COOLING
OUTPUT
RS485
COM
PART NUMBER
115/230 VAC
YES NO NO 2 NO YES TCU10104
YES YES NO 2 NO NO TCU11108
YES NO YES 2 NO NO TCU12108
These models have dual alarm outputs, or single alarm with cooling outputs, with shared common terminals
(Form A Type). As a result, these outputs should be fitted with the same type of output module. The main
output (OP1) may be fitted with any type of output module.
NEMA
4X/IP65
BEZEL
4 to 20 mA
ANALOG
OUTPUT
0 to 10 VDC
ANALOG
OUTPUT
ALARM
OUTPUTS
COOLING
OUTPUT
RS485
COM
PART NUMBER
115/230 VAC
YES NO NO 1 NO YES TCU10307
YES YES NO 1 NO NO TCU11306
YES NO YES 1 NO NO TCU12306
SECOND ANALOG INPUT MODELS
MOTORIZED VALVE POSITIONER MODELS