Red Lion GEMINI 33 - Manual (Page 43)

APPENDIX “D” - GEMINI 3300 BATCH COUNTER MODE FUNCTION COMMAND CODE SUMMARY
-41-
CODE MODE DESCRIPTION COMMENTS
66 “OPERATOR ACCESSIBLE FUNCTIONS” MODES “PGM.DIS” Terminal connected to “Comm”
- (+) Reset Button & “RST” Terminal Enabled Front panel reset can be independently disabled by using DIP
switch.
- (-) Reset Button & “RST” Terminal Disabled* Both front panel and rear terminal are disabled.
+/-1 No Functions Enabled
+/-2 Preset Programming Enabled
+/-3 Scale Factor Programming Enabled
+/-4 Preset & Scale Factor Programming Enabled
+/-5 Preset, 2-Button Reset & Counter Load Programming Enabled
+/-6 Preset, Scale Factor, 2-Button Reset & Counter Load
Programming Enabled
1 Display P PROCESS PRESET 1 Up to +999999
1 Display B BATCH PRESET Up to +999999
2 Display P PROCESS PRESET 2 Up to +999999
3 SCALE FACTOR Up to +5.9999
E & +/- Disp P, B, T COUNTER LOAD VALUE Up to +999999. Counter load value is saved in memory when
power is removed.
E & 1 RESET PROCESS COUNTER
E & 2 RESET BATCH COUNTER
*Polarity sign is displayed in front of the identifier, a (-) sign is displayed, a (+) sign is not.