HP OneView for VMware vCenter - Manual (Page 51)

value assumes all unallocated space is formatted the same as this volume. For all other
volume types, no value is displayed.
◦ P9000/XP—P9000 or XP Thin Provisioning pool capacity.
•
Array Disk Emulation Type (P9000 and XP arrays only)—LDEV emulation type.
•
Replicated—Specifies whether the disk is replicated
Viewing virtual disks
The Virtual Disks tab is displayed in the HP Insight Management tab for selected hosts, clusters,
VMs, and datastores. See
Figure 25 (page 51) .
Figure 25 Virtual Disks tab
This tab displays the following information:
•
Virtual Disk Name—Virtual disk name assigned by VMware
•
Virtual Disk Type—Virtual disk type (VMDK or RDM)
•
Virtual Machine—Name of the VM associated with the selected VMDK or RDM
•
Datastore—Datastore name or the .vmdk name for the RDM
•
Provisioned Capacity—Disk capacity visible to a VM using this VMDK or RDM
•
Allocated Capacity—Disk capacity reserved by VMware for the VMDK or RDM
For an RDM, this value will match the provisioned capacity value. For a VMDK, this value
might be less than the provisioned capacity value if VMware thin provisioning is used. This
is separate from thin provisioning configured in the storage array.
•
VMware Provisioned—Thick or thin
Viewing HBAs
The HBAs tab is displayed in the HP Insight Management tab for selected hosts, clusters, VMs, and
datastores. See
Figure 26 (page 52) .
Using the Storage Module for vCenter 51