HP OneView for VMware vCenter - Manual (Page 78)

NOTE: The HP XP P9000/HP XP array does not allow host access to be specified on
a per-host or per-path basis.
◦ HP StoreOnce Backup—Not applicable
•
Host Mode
HP StoreVirtual—Not applicable ◦
◦ HP 3PAR StoreServ—Not applicable
◦ HP EVA—Host mode assigned to the HP EVA host object
◦ HP MSA—Name of the host's profile
◦ HP XP P9000/HP XP—Host mode assigned to the host group
◦ HP StoreOnce Backup—Not applicable
•
Host Name—Host name
•
Current Owner—Specifies whether the host is the current owner of the selected VM
•
Host HBA Port WWN
HP StoreVirtual—IQN assigned to the host ◦
◦ HP 3PAR StoreServ (FC)—WWN for the host port on the host end of this path
◦ HP 3PAR StoreServ (iSCSI)—IQN assigned to the host
◦ HP EVA—WWN for the host port on the host end of this path
◦ HP MSA (FC, SAS)—WWN for the host port on the host end of this path
◦ HP MSA (iSCSI)—IQN assigned to the host
◦ HP XP P9000/HP XP—WWN for the host port on the host end of this path
◦ HP StoreOnce Backup—Not applicable
•
Array Port WWN
HP StoreVirtual—IQN used by the host for connecting to this disk on this storage array ◦
◦ HP 3PAR StoreServ (FC)—WWN for the storage array port on the storage array end of
this path
◦ HP 3PAR StoreServ (iSCSI)—IQN used by the host for connecting to this disk on this
storage array
◦ HP EVA—WWN for the storage array port on the storage array end of this path
◦ HP MSA (FC, SAS)—WWN for the storage array port on the storage array end of this
path
◦ HP MSA (iSCSI)—IQN used by the host for connecting to this disk on this storage array
◦ HP XP P9000/HP XP—WWN for the storage array port on the storage array end of this
path
◦ HP StoreOnce Backup—Not applicable
78 Using HP OneView for vCenter