HP OneView for VMware vCenter - Manual (Page 15)

Adding HP 3PAR StoreServ
To add an HP 3PAR StoreServ:
1.
Access the Storage Administrator Portal.
For instructions, see “About the Storage Administrator Portal” (page 13) .
2. Click Add.
The Add Storage System or Management Server page appears.
3. Select HP 3PAR StoreServ in the Type list, and then click Next.
The Add HP 3PAR StoreServ page appears.
4. Enter the following connection parameters for the HP 3PAR StoreServ storage system and click
Next.
•
Management server host name or IP address
•
User name
•
Password
The HP 3PAR StoreServ storage system certificate is displayed.
5. Review the HP 3PAR StoreServ storage system certificate. The certificate displayed is the most
current certificate returned from the HP 3PAR StoreServ storage system.
To verify the data in the certificate, perform the following steps:
a.
Copy the entire certificate text into a text file named <filename>.cer.
b. Open the file in a browser to view the details of the certificate.
Verify the certificate data.
6. Click Next.
The Add HP 3PAR StoreServ page appears, listing the storage pools on the selected storage
system.
7. Select the Full Access check box for one or more storage pools to enable provisioning by the
StoreFront Module for vCenter.
Storage pools do not need to be assigned Full access if they are not intended to be used for
provisioning operations.
8. Click Finish.
The HP 3PAR StoreServ is added to the Configured Storage Systems and Management Servers
list.
Adding HP EVA Command View management servers
To view information about an HP EVA in the vSphere Client, use the Storage Administrator Portal
to add the HP EVA Command View management server and the HP EVA. You can add a
management server and associate a storage system in a single step, or you can add them separately
and associate them by modifying either the HP EVA Command View management server or the
HP EVA.
To add an HP EVA Command View management server:
1.
Access the Storage Administrator Portal.
For instructions, see “About the Storage Administrator Portal” (page 13) .
2. Click Add.
The Add Storage System or Management Server page appears.
3. Select HP EVA Command View in the Type list, and then click Next.
The Add HP EVA Command View page appears.
Configuring the StoreFront Module for vCenter 15