HP OneView for VMware vCenter - Manual (Page 77)

◦ HP XP P9000/HP XP—Emulation type and LDKC:CU:LDEV (for example, HP OPEN-V-CVS
(00:04:3F))
◦ HP StoreOnce Backup—Not applicable
•
Array Disk Type—Array disk type
•
Array Name
HP StoreVirtual—Management group name ◦
◦ HP 3PAR StoreServ—Array display name
◦ HP EVA—Array display name
◦ HP MSA—System name
◦ HP XP P9000/HP XP—Array serial number
◦ HP StoreOnce Backup—Not applicable
•
Array Type—HP array type
•
Array Disk Total Capacity—Total amount of storage available to the datastore
•
Array Disk Allocated Capacity—Size of the virtual disk on the array
•
Array Disk Provisioned—Whether the virtual disk uses thick or thin provisioning
•
Array Controller—Controller used for this path
•
Array Port—Storage array's port identifier used for this path
•
Host Group
HP StoreVirtual—Name configured for the host's IQN in the management console
◦
◦ HP 3PAR StoreServ—Name of the host object containing the host WWN for this path
◦ HP EVA—Name of the host object containing the host WWN for this path
◦
HP MSA—Nickname of the host with the host WWN for this path
◦ HP XP P9000/HP XP—Name of the host group containing the HBA WWN on the array
port for this path
◦ HP StoreOnce Backup—Not applicable
•
Host Access
HP StoreVirtual—Host access level assigned to the presentation of the disk to the host (for
example, READ/WRITE or READ-ONLY) ◦
◦ HP 3PAR StoreServ—N/A. 3PAR storage volumes operate in a read-only/read-write
configuration.
◦ HP EVA—Host access level assigned to the presentation of the disk to the host (for example,
READ/WRITE or READ-ONLY)
◦ HP MSA—Access setting for volume mapping (for example, READ/WRITE or READ-ONLY)
◦ HP XP P9000/HP XP—Host access level assigned to the volume
Using the StoreFront Module for vCenter 77