Viewing hbas, Viewing paths, Viewing hbas viewing paths – HP OneView for VMware vCenter User Manual
Page 72
Viewing HBAs
The HBAs page displays the following information:
•
Host Names—Host name or cluster host names
•
Type—HBA type
•
VMware Device Identifier—HBA identifier assigned by VMware
•
WWN/IQN—HBA WWN
NOTE:
HBA WWN address is not available for HP MSA SAS arrays.
•
Label—HBA identifier assigned by VMware
Viewing paths
The Paths tab is displayed for selected components. It displays the following information:
•
Array Disk Name
HP StoreVirtual—Volume name
◦
◦
HP 3PAR StoreServ—Volume name
◦
HP EVA—Path for the virtual disk on the storage array
◦
HP MSA—Volume name
◦
HP XP P9000/HP XP—Emulation type and LDKC:CU:LDEV (for example, HP OPEN-V-CVS
(00:04:3F))
◦
HP StoreOnce Backup—Not applicable
•
Array Name
HP StoreVirtual—Management group name
◦
◦
HP 3PAR StoreServ—Array display name
◦
HP EVA—Array display name
◦
HP MSA—System name
◦
HP XP P9000/HP XP—Array serial number
◦
HP StoreOnce Backup—Not applicable
•
Host HBA Port WWN/IQN
HP StoreVirtual—IQN assigned to the host
◦
◦
HP 3PAR StoreServ (FC)—WWN for the host port on the host end of this path
◦
HP 3PAR StoreServ (iSCSI)—IQN assigned to the host
◦
HP EVA—WWN for the host port on the host end of this path
◦
HP MSA (FC, SAS)—WWN for the host port on the host end of this path
◦
HP MSA (iSCSI)—IQN assigned to the host
◦
HP XP P9000/HP XP—WWN for the host port on the host end of this path
◦
HP StoreOnce Backup—Not applicable
72
Using HP OneView for vCenter