Adding hp xp p9000 storage systems, Adding hp xp storage systems – HP OneView for VMware vCenter User Manual
Page 18
7.
Select the Full Access check box for one or more storage pools to enable provisioning by the
StoreFront Module for vCenter.
Storage pools do not need to be assigned Full access if they are not intended to be used for
provisioning operations.
8.
Click Finish.
The HP MSA System is added to the Configured Storage Systems and Management Servers
list.
Adding HP XP P9000 storage systems
To add an HP XP P9000 storage system:
1.
Verify that a command device from the P9000 storage system is presented to the host running
the StoreFront Module for vCenter. Make sure that the command device is enabled and security
is disabled for the command device.
2.
Access the Storage Administrator Portal.
For instructions, see
“About the Storage Administrator Portal” (page 13)
3.
Click Add.
The Add Storage System or Management Server page appears.
4.
Select HP XP P9000 in the Type list, and then click Next.
The Add HP XP P9000 storage systems page appears. The available P9000 storage systems
are listed by serial number.
5.
Select a storage system.
6.
Enter the Remote Web Console credentials, and then click Finish.
The array is added to the Configured Storage Systems and Management Servers list.
NOTE:
The HP XP P9000 storage system does not support provisioning by the StoreFront
Module for vCenter.
Adding HP XP storage systems
To add an HP XP storage system:
1.
Verify that a command device from the XP array is presented to the host running the StoreFront
Module for vCenter.
2.
Access the Storage Administrator Portal.
For instructions, see
“About the Storage Administrator Portal” (page 13)
3.
Click Add.
The Add Storage System or Management Server page appears.
4.
Select HP XP in the Type list, and then click Next.
The Add HP XP storage systems page appears. The available HP XP storage systems are listed
by serial number.
5.
Select a storage system.
6.
Enter the Remote Web Console credentials, and then click Finish.
The storage system is added to the Configured Storage Systems and Management Servers
list.
NOTE:
The HP XP storage system does not support provisioning by the StoreFront Module
for vCenter.
18
Configuring HP OneView for vCenter