HP StorageWorks ESL9000 Tape Library - Manual (Page 88)

Operator Commands
88 HP StorageWorks ESL9000 Series Tape Library User Guide
Unloading the Load Port
The Unload Imp/Exp command moves a tape cartridge from the load port to an
available storage bin. This option must be invoked after inserting a tape into the
load port whenever the library Auto Load feature is disabled. See “
Configuring
Library Options ”on page 79.
Note: You can also use the Move Cartridge command to unload the load port. This
command is especially useful if the destination of the move is important. For more
information about the Move Cartridge command, see “ Moving Cartridges ” on
page 85.
To unload the load port:
1. From the Operator screen, press the Unload Imp/Exp button. The control
panel displays a Command In Progress dialog box.
2. If it becomes necessary to stop the Unload command, press the Abort button.