Turning the library off – HP StorageWorks ESL9000 Tape Library User Manual

Page 58

Text mode
Original mode

Preparing the Library for Operation

HP StorageWorks ESL9000 Series Tape Library User Guide

Turning the Library Off

To turn the library off:

1. Place the library off-line by pressing the Standby button. The library robotics

complete any current commands and then stop.

2. Verify that the control panel display shows System Off-line.

3. Verify that the gripper is empty by checking the Overview screen on the

control panel (see Chapter 3). If there is a tape cartridge in the gripper,
perform a Move command to place the cartridge in an available storage bin.

4. Turn off the power switch located below the control panel.

5. Turn off both circuit breakers on the AC power distribution assembly.

Note:

Wait 10 seconds before turning on the power switch again.