Configuring a library option, Figure 32: configure: options screen, 32 configure: options screen – HP StorageWorks ESL9000 Tape Library User Manual

Page 80

Operator Commands

Note:

Before changing the Auto Drive Unload configuration option, check the

recommendations of your software application.

■

Auto Drive Unload—Causes the drive to unload a tape when a Move
Medium command is received (default in Enable).

■

Barcode Retries—Lets you set a number of attempts to read a bar code label
before giving up (default is 8).

■

Set StorageWorks Defaults—Returns all configure options to factory default
states.

Configuring a Library Option

To configure a library option:

1. From the Operator screen, press the Configure Options button. The control

panel displays the Configure: Options screen (see

Figure 32: Configure: options screen