HP StorageWorks ESL9000 Tape Library - Manual (Page 60)

Operating the Control Panel
60 HP StorageWorks ESL9000 Series Tape Library User Guide
Using the Control Panel
The control panel is activated by touching the screen, and is located at the front of
the library. The menus displayed on the control panel let you obtain information
about the library, execute library commands, and test library functions. The
control panel functions are grouped into the following categories (see
Figure 22 ):
■ Overview screen—Displays current tape drive, gripper, and load port content
and activities.
■ Tapes screen—Displays tape drive, storage bin, load port, and gripper
inventories.
■ Operator screen—Contains library configuration and control functions
(password protected).
■ Service screen—Contains reporting functions, system tests, and service
commands (password protected).
■ Multi-Unit screen—Contains multi-unit configuration and calibration
commands (password protected).
■ License screen—Lets you enter an upgrade key to access additional bins.
Figure 22: Control panel home screen (ESL9595 shown)