HP StorageWorks ESL9000 Tape Library - Manual (Page 73)

73 HP StorageWorks ESL9000 Series Tape Library User Guide
4
Operator Commands
This chapter describes the commands found on the Operator screen of the library
control panel. Sections in this chapter include:
■ Opening the Operator Screen , page 74
■ Configuring the Library , page 76
■ Configuring Library Options , page 79
■ Calibrating the Library , page 83
■ Performing an Inventory , page 84
■ Moving Cartridges , page 85
■ Unloading a Drive , page 87
■ Unloading the Load Port , page 88
Note: The library must be off-line to perform any of the functions listed above. To
change the library status, press the Standby button on the control panel.