beautypg.com

Performing an inventory – HP StorageWorks ESL9000 Tape Library User Manual

Page 84

background image

Operator Commands

84

HP StorageWorks ESL9000 Series Tape Library User Guide

Performing an Inventory

The Inventory Tapes command reads the bar code labels of the cartridges in the
tape drives, fixed storage bins, and the load port bins. All elements that contain
cartridges without labels are marked as full with no label.

To perform an inventory:

1. Press the Inventory Tapes button in the Operator screen. The control panel

displays a Command In Progress screen.

2. Press the Abort button to stop continuous running of the inventory process.

Otherwise, the process will continue until all storage elements have been
inventoried.

Note:

The inventory process is also stopped if an error is detected or if the rear door is

opened. In this case, the control panel displays an error message.