HP StorageWorks ESL9000 Tape Library - Manual (Page 123)

Sense Data Values
123 HP StorageWorks ESL9000 Series Tape Library User Guide
04 84 08
VERTICAL HOME NOT FOUND
Vertical axis did not reach the home position.
Visually inspect vertical axis and belt, look for debris, excessive wear, or
damage.
04 84 20
VERTICAL TEST FAILURE
The value of the vertical encoder did not change during the self-test.
Visually inspect vertical axis and belt, look for debris, excessive wear, or
damage.
04 84 22
VERTICAL ENCODER FAILURE
The value of the vertical encoder did not change during the self-test.
Visually inspect vertical axis and belt, look for debris, excessive wear, or
damage.
04 84 23
VERTICAL POSITION OVERFLOW
The position step counter overflowed.
Issue a
CALIBRATE ALL
command.
04 84 30
VERTICAL MAPPING FAILURE
Scanner was unable to detect vertical target during calibration.
Determine which target (drive, bin, load port) is not mapping. Inspect
target for scratches, bends, wear, etc.
Invoke
CALIBRATE ALL
command from control panel.
04 85 00
HORIZONTAL INTERNAL FAILURE
Horizontal axis code internal failure.
Upgrade firmware to latest revision.
Call your authorized service provider.
04 85 03
HORIZONTAL MECHANICAL POSITION ERROR
Horizontal axis did not reach desired position.
Retry command.
Determine if anything is obstructing the horizontal motion. If a tape is
colliding with a bin or drive, then run a
CALIBRATE ALL
command.
Visually inspect vertical axis and belt, look for debris, excessive wear, or
damage.
Table 26: Sense Data Values (Hexadecimal) (Continued)
Sense
Key ASC ASCQ Message Name/Description