HP StorageWorks ESL9000 Tape Library User Manual

Page 131

Sense Data Values

131

DATA TRANSFER CHANGED

A drive has been inserted into the library.

WARNING SAFE TEMPERATURE EXCEEDED

This is only a warning that the temperature in the library exceeds the

normal operational temperature 96.8

F (36

C).

Check fans, look for airflow obstructions, and make sure ambient room

temperature is sufficiently cool.

SCSI ABORT

Command aborted because host sent SCSI Abort Message.

LOGICAL UNIT COMMUNICATION FAILURE

Check cables. Ensure library is turned on. Retry command.

LIBRARY COMMUNICATION TIME-OUT

ER_LU_COM_TO

Retry command.

INCOMPATIBLE MEDIA

An attempt was made to move media to a destination element that is

incapable of receiving it. Make sure that you are using media that is

compatible with your drive and library.

SCSI MESSAGE ERROR

Make sure the backup software supports the library, and has the latest

patches.

SELECT OR RE-SELECT FAILURE

Library timed out trying to reselect host. Make sure host is powered up

and on-line.

SCSI PARITY ERROR

SCSI Parity Error detected. Check SCSI cable connections, cable length,

and termination.

INITIATOR DETECTED ERROR

Initiator Detected Error Message was received from the host.

TRANSFER FULL - AT END OF PLACE

Gripper has cartridge in it at end of a place operation (Move Medium

with a target other than the Transfer). Move cartridge to empty storage

bin using

MOVE

command.

Table 26: Sense Data Values (Hexadecimal) (Continued)

Sense

Key

ASC

ASCQ

Message Name/Description