HP StorageWorks ESL9000 Tape Library - Manual (Page 40)

Preparing the Library for Operation
40 HP StorageWorks ESL9000 Series Tape Library User Guide
Opening the Library Doors and Access Panels
The ESL9322 has one front door and one rear access panel. The ESL9595 has two
front doors and three rear access panels.
To unlock and open front doors and rear access panels:
1. Using the key from the accessory kit, unlock the front door latch.
2. Lift the latch above the door lock.
3. Pull on the door latch to open the door, exposing the inside of the library
cabinet.
4. Unlock any rear access panel using a 5/32 hex wrench.
Note: When the front doors are open, the robotics are disabled, but the library
remains on-line. When the rear access panels are open, the robotics continue to work,
but only at half speed.
Caution: Rear access panels must be closed during normal operation for
proper cooling and proper operation of the bar code scanner.
To close and lock front doors and rear access panels:
1. Turn the door latch to secure the door to the library frame.
2. Lower the latch over the door lock.
3. Using the key from the accessory kit, lock the latch in place.
4. Close and lock any rear access panel using a 5/32 hex wrench.