HP StorageWorks 1510i Modular Smart Array - Manual (Page 99)

set unit
Description Enables or disables the array accelerator cache for a specific LUN.
Syntax
set unit <unit> cache=enable|disable
Operands <unit>
The number (0-31) of the LUN to modify.
cache=enable|disable
Enables or disables the use of the array accelerator cache for the specified
LUN.
Example 1
To enable the cache on unit 0:
CLI> set unit 0 cache=enable
Cache for unit 0 has been enabled.
Example 2
To disable the cache on unit 1:
CLI> set unit 1 cache=disable
Cache for unit 0 has been enabled.
See also • add unit
• bind unit
• delete unit
• show unit
• accept unit
• expand unit
• extend unit
• migrate unit
• set unit_id
• show unit_id
• unbind unit
newpage pi
1510i Modular Smart Array Command Line Interface user guide 99