About this guide, Intended audience, Related documentation – HP StorageWorks 1510i Modular Smart Array User Manual
Page 9
About this guide
This document provides information to help you use the HP StorageWorks 1510i Modular Smart Array
(MSA1510i) Command Line Interface (CLI).
Intended audience
This guide is intended for users familiar with iSCSI storage networks and, in particular, with RFC3720. If
you prefer to use a Graphical User Interface (GUI), consider using the HP Storage Management Utility
(SMU), described in the HP Storage Management Utility user guide.
Related documentation
The following documents describe the MSA1510i:
•
HP StorageWorks 1510i Modular Smart Array installation and configuration roadmap poster
•
HP StorageWorks 1510i Modular Smart Array iSCSI concepts and deployment guide
•
HP StorageWorks 1510i Modular Smart Array installation and user guide
•
HP StorageWorks 1510i Modular Smart Array maintenance and service guide
•
HP StorageWorks 1510i Modular Smart Array Command Line Interface user guide
•
HP StorageWorks Storage Management Utility user guide
These documents are on the MSA1510i Support CD, version 2.0 or later, available on the MSA1510i
support page:
In addition to MSA1510i-specific documents, the following guide, available on the SAN Infrastructure
website:
ailed, helpful information about Fibre Channel and
iSCSI networks:
•
HP SAN Design reference guide
The following iSCSI-related technical information is available on the Internet Engineering Task Force
website:
•
RFC number 3720: Internet Small Computer Systems Interface (iSCSI)
•
RFC number 3721: iSCSI Naming and Discovery
•
RFC number 4171: Internet Storage Name Service (iSNS)
•
RFC number 2608: Service Location Protocol (SLP)
•
RFC number 3927: IPv4 Link-Local Addresses (Zeroconf)
The following VLAN document is available on the Institute of Electrical and Electronics Engineers website:
•
802.1q for Virtual LANs:
1510i Modular Smart Array Command Line Interface user guide
9