HP StorageWorks 1510i Modular Smart Array - Manual (Page 121)

show port
Description Shows status information for the storage ports.
Syntax show port [<port>]
Operands <port>
[Optional] The name of the physical port. For example: SA0. If no value is
entered, then all ports are shown.
Example
To show the status of port SA0:
CLI> show port sa0
Port MAC Address Media Status Speed Mode
---- ----------------- ----- ------ ----- ----
SA0 00:12:79:68:b5:5a Copper Link Up 1000 Mb/s Full Duplex
See also • set port
newpage pi
1510i Modular Smart Array Command Line Interface user guide 121