HP StorageWorks 1510i Modular Smart Array - Manual (Page 24)

4. [Optional] If required, enable access to the CLI via Telnet (not recommended) using the set service
command:
CLI> set service telnet on
CAUTION:
The Telnet protocol is not a secure method of transmitting data over a network. Because
Telnet does not encrypt data, anyone with the proper knowledge and tools can read
information being sent over the network. For this reason, HP recommends that you use SSH
to connect to the MSA1510i over a network, or use a serial connection to connect to the
MSA1510i directly.
24 Initial configuration sequence