HP StorageWorks 1510i Modular Smart Array - Manual (Page 77)

set acl
Description Sets access controls on or off for an iSCSI target.
NOTE:
When set acl disable is entered, all existing ACL entries on the
target are automatically deleted. All storage on the target is immediately
available to all initiators.
Syntax
set acl <target> enable|disable
Operands <target>
The alias name of the iSCSI target.
enable|disable
Specifies whether to enable or disable Access Controls.
Example
CLI> set acl target1.test disable
Access Controls Disabled on Target target1.test
See also • add acl_entry
• delete acl_entry
• show acl_entry
newpage pi
1510i Modular Smart Array Command Line Interface user guide 77