HP StorageWorks 1510i Modular Smart Array - Manual (Page 30)

add initiator
Description Adds an iSCSI
initiator entry to the initiator pool.
Syntax add initiator <name> [alias=<alias>]> [profile=<profile>]
Operands <name>
The fully qualified iSCSI name of the initiator (1-223 characters).
alias=<alias>
[Optional] The alias name (1-16 characters) of the initiator.
profile=<profile>
[Optional] The operating system profile to associate with the initiator, where
<profile> is one of the following entries:
windows—for Microsoft Windows servers.
linux—for Linux servers.
hp—for HP-UX servers.
openvms—for OpenVMS servers.
tru64—for Tru64 UNIX servers.
solaris—for Solaris servers.
netware—for Netware servers.
xp—for XP servers.
Example
CLI> add initiator initiator1.test alias=alias1.test profile=windows
The initiator was added successfully.
Name: initiator1.test
Alias: alias1.test
See also • delete initiator
• show initiator
newpage pi
30 Command reference