HP StorageWorks 1510i Modular Smart Array - Manual (Page 85)

set iscsi_keys
Description Sets iSCSI login parameter keys for an iSCSI target.
Syntax set iscsi_keys <target> [<parameter>=<setting>]
NOTE:
For the optional parameter value, to reset all the keys to their default
values, enter default.
Operands <target>
Specifies the alias name of the iSCSI target.
authentication=none|chap
(Default =none)
immediate_data=yes|no
(Default = yes)
initial_r2t=no|yes
(Default = no)
data_sequence_in_order=yes|no
Default = yes)
data_sequence_in_order=yes|no
Default = yes
header_digest=yes|no
Default = yes
data_digest=yes|no
Default = yes
first_burst_size=<value>
Value is a number from 512 to 8192. Default = 8192 (8KB).
max_burst_size=<value>
Value is a number from 512 to 65536. Default = 65536 (64KB).
logout_login_max_time=<value>
Value is a number from 1 to 3600 (seconds). Default = 2 seconds.
max_connections=<value>
Value is a number from 1 to 4. Default = 1.
max_out_r2t=<vlaue>
Value is a number from 1 to 8. Default = 8
<max_rx_pdu_length>
Value is a number from 512 to 65536. Default = 65536 (64KB)
1510i Modular Smart Array Command Line Interface user guide 85