HP StorageWorks 1510i Modular Smart Array - Manual (Page 28)

add acl_entry
Description Grants an initiator access to an iSCSI target or specific LUN. If you specify
the mapped LUN alias, the initiator is granted access to the specified
mapped LUN. If you specify the target alias, all of the target’s mapped
LUNs become accessible to the initiator. If more LUNs are mapped to the
target at a later time, use the add acl_entry command to include them.
NOTE:
If Access Controls are turned off, this command turns them on.
Syntax add acl_entry <initiator> target=<target>
-or-
add acl_entry <initiator> lun=<lun>
Operands <initiator>
The iSCSI alias name of the initiator.
target=<target>
The iSCSI alias name of the target.
lun=<lun>
The alias name of an existing mapped LUN.
Example
CLI> add acl_entry initiator1 lun=lun1t1
Allowed Initiator initiator1 access to Mapped LUN lun1t1
See also • set acl
• delete acl_entry
• show acl_entry
• bind unit
• unbind unit
newpage pi
28 Command reference