HP StorageWorks 1510i Modular Smart Array - Manual (Page 44)

bind unit
Description Binds a logical unit to a LUN on an iSCSI target. A unit can only be bound
to one target. The LUN number is seen by iSCSI initiators when they access
the target. Multiple iSCSI targets cannot have LUNs mapping to the same
unit.
Syntax bind unit <unit> <target> <lun> [alias=<alias>]
Operands <unit>
The logical unit to which the LUN is mapped (0-31).
<target>
The alias name of the iSCSI target.
<lun>
The mapped LUN number on the target (1-32).
alias=<alias>
[Optional] An alias name for the mapped LUN.
Example
To bind LUN 2 to Unit 1:
CLI> bind unit 1 target1 2
On Target target1:
LUN 2 mapped to Unit 1
Alias: lun2t1
See also • add acl_entry
• delete acl_entry
• show target
• unbind unit
newpage pi
44 Command reference