HP StorageWorks 1510i Modular Smart Array - Manual (Page 96)

set target_chap
Description Sets the CHAP secret (password) used to access an iSCSI target when
CHAP is enabled. To enable CHAP authentication on the target, use the set
iscsi_keys command.
Syntax
set target_chap <target> <secret>
Operands <target>
The alias name of the iSCSI target.
<secret>
The CHAP secret (12–16 character password) used to access an iSCSI
target when CHAP is enabled.
Example
To set the CHAP secret on target1 to mychapsecret123:
CLI> set target_chap target1 mychapsecret123
See also • set initiator_chap
• add initiator
• Canonical iSCSI target
newpage pi
96 Command reference