HP StorageWorks 1510i Modular Smart Array - Manual (Page 31)

add ip
Description Assigns an IP address to the specified storage port.
Syntax add ip <port> mask>]> [<vlan>]
Operands <port>
The storage port to which the address is bound. Options include: SA0,
SA1, SB0, or SB1.
<ip[/<mask>]|default>
The IP address in dotted notation. If default is entered instead of an IP
address, the default gateway will be used.
If a subnet mask is included with the ip address, it must be entered in
dotted notation or number of bits, and must be entered directly after the IP
address, separated with a slash (/) character (no spaces).
<vlan>
[Optional] The VLAN ID (1-4096) with which to associate the new IP
address. If no VLAN is specified, packets remain untagged.
Example
CLI> add ip sa0 10.0.8.224/255.255.0.0
The IP address has been added successfully.
See also • delete ip
• show ip
newpage pi
1510i Modular Smart Array Command Line Interface user guide 31