HP StorageWorks 1510i Modular Smart Array - Manual (Page 101)

show acl_entry
Description Shows the access control lists for all initiators on a specified iSCSI target,
or on all targets.
NOTE:
If access controls are disabled, a message is displayed.
Syntax show acl_entry [target=<target>]
Operands target=<target>
[Optional] Limits the display to the ACL entries for a specific target,
indicated by the target alias name. If this operand is not used, the complete
ACL is displayed.
Example
CLI> show acl_entry
ACL enabled on Target target1
Initiator Alias Accessible Mapped LUNs
--------------- -----------------
initiator1 lun1t1
See also • set acl
• add acl_entry
• delete acl_entry
newpage pi
1510i Modular Smart Array Command Line Interface user guide 101