HP StorageWorks 1510i Modular Smart Array - Manual (Page 143)

unbind unit
Description Removes the mapping of a logical unit to a LUN on an iSCSI target. After
the LUN is unmapped, iSCSI initiators cannot access the underlying logical
unit until it is mapped to a LUN on another target.
Syntax unbind unit <alias>
Operands <alias>
The alias name of the mapped LUN.
Example
To remove the mapping defined in lun2t1:
CLI> unbind unit lun2t1
LUN lun2t1 has been unmapped.
See also • bind unit
1510i Modular Smart Array Command Line Interface user guide 143