HP StorageWorks 1510i Modular Smart Array - Manual (Page 90)

set management_login
Description Configures the login and password used to access the management
interface. The command prompts you to enter your old username and
password, and then enter the new username and password. If you have
forgotten your old password, use the reset management_login command,
or reset the password using the front panel display.
NOTE:
The default factory setting for both the username and password is root .
The username and password must be changed the first time you log on to
the MSA1510i.
Syntax set management_login
Operands None
See also • reset management_login
• set management
• set service
newpage pi
90 Command reference