HP StorageWorks 1510i Modular Smart Array - Manual (Page 33)

add portal
Description Adds a new portal entry in the portal pool. To use the portal, it must be
bound to a portal group using the bind portal command.
Syntax add portal < ip> [port=<port>] [alias=<alias>]
Operands <ip>
The IP address of the portal in dotted notation. The IP address must have
been previously added using the add ip command.
port=<port>
[Optional] The TCP port number of the portal. Defaults to 3260 if not
defined.
alias=<alias>
[Optional] A short descriptive alias (1-16 characters) for the portal.
Example
CLI> add portal 10.0.8.223 alias=portal1.test
The portal was added successfully.
Alias: portal1.test
See also • bind portal
• delete portal
• show portal
newpage pi
1510i Modular Smart Array Command Line Interface user guide 33