HP StorageWorks 1510i Modular Smart Array - Manual (Page 89)

gateway=<ip>
The IP address, in doted notation.
dns1=<ip>
The IP address, in doted notation.
dns2=<ip>
The IP address, in doted notation.
vlan=<vlan>
The VLAN ID (1-4096, or none to disable VLAN tagging).
ntp=<ip>
The IP address, in doted notation.
Example 1
To set up the management interface to use port MA0, and to activate DHCP for the management interface:
CLI> set management port=MA0 dhcp=enable
Management settings changed.
Example 2
To set up the management interface to use port MA1 and to have the following properties:
• Static IP address = 10.11.1.2
• Netmask = 255.0.0.0 (8 bits set, class A)
CLI> set management port=MA1 ip=10.11.1.2/8
Management settings changed.
Example 3
To disable the management interface:
set management disabled
Management settings changed.
See also • set management_login
newpage pi
1510i Modular Smart Array Command Line Interface user guide 89