HP StorageWorks 1510i Modular Smart Array - Manual (Page 32)

add isns_server
Description Adds an iSNS server to the iSNS server pool.
NOTE:
iSNS servers can be added with this command only when the iSNS
server discovery mode is set to manual . For more information, see
“ set isns ” on page 87.
Syntax
add isns_server <ip> [port=<port>] [alias=<alias>]
Operands <ip>
The IP address of the iSNS server to add.
port=<port>
[Optional] The TCP port of the iSNS server. Defaults to 3205 if no value is
entered.
alias=<alias>
[Optional] An alias name for the iSNS server.
Example
CLI> add isns_server 10.10.10.50 alias=server1.test
The iSNS server was added successfully.
Alias: server1.test
See also • delete isns_server
• show isns_server
• set isns
newpage pi
32 Command reference