Set sleep delay, Set the sleep schedule, Set sleep delay set the sleep schedule – HP Color LaserJet Enterprise CM4540 MFP series User Manual
Page 296
Set sleep delay
1.
From the Home screen, touch the
Administration
button.
2.
Open each of the following menus:
a.
General Settings
b.
Energy Settings
c.
Sleep Delay
3.
Select the appropriate time period, and then touch the
OK
button.
NOTE:
The default value is 45 minutes.
Set the sleep schedule
NOTE:
You must configure the date and time settings before you can use the
Sleep Schedule
feature.
If you have already configured the date and time settings, you can skip steps 2 and 3 in the following
procedure.
1.
From the Home screen, touch the
Administration
button, and then open the
General Settings
menu.
2.
Open the
Date/Time Format
menu. Configure the following settings:
●
Date Format
●
Time Format
3.
Open the
Date/Time
menu and configure the following settings:
●
Date
●
Time
●
Time Zone
If you are in an area that uses daylight savings time, select the
Adjust for Daylight Savings
box.
4.
Open the
Energy Settings
menu, and then open the
Sleep Schedule
menu.
5.
Touch the Add button, and then select the type of event to schedule:
Wake Up
or
Sleep
.
6.
Configure the following settings:
●
Event Time
●
Event Days
●
Event Description
7.
Open the
Holidays
menu to configure which days are holidays for your area.
276
Chapter 13 Manage and maintain
ENWW