HP Color LaserJet Enterprise CM4540 MFP series - Manual (Page 144)

Table 7-1 Supplies status messages (continued)
Control panel message Description Recommended action
Supplies very low This message appears when at least two
supplies have reached the very low
threshold. Touch the
Supplies button to see
which supplies are low. The actual supply
life remaining might vary. You do not need
to replace the supplies at this time unless
print quality is no longer acceptable. After
an HP supply has reached the very low
threshold, the HP premium protection
warranty for that supply has ended.
To continue printing in color, either replace
the supply or reconfigure the product by
using the
Manage Supplies menu on the
control panel.
Toner collection unit low The toner collection unit is almost full. The
actual supply life remaining might vary. You
do not need to replace the toner collection
unit at this time unless print quality is no
longer acceptable. To continue printing, either touch the OK
button or replace the toner collection unit.
Toner collection unit very low The toner collection unit is almost full, and
the product is configured to stop at this point.
The actual supply life remaining might vary.
After an HP supply has reached the very low
threshold, the HP premium protection
warranty for that supply has ended. Reconfigure the product to continue printing,
or replace the toner collection unit.
CAUTION: Continuing to print when the
toner collection unit is full could damage the
product.
Transfer kit low This message appears when the transfer kit
reaches the low threshold. The actual supply
life remaining might vary. You do not need
to replace the transfer kit at this time unless
print quality is no longer acceptable. No action is necessary to continue. If the
print quality is no longer acceptable, replace
the transfer kit. Instructions are included with
the new transfer kit.
Transfer kit very low This message appears when the transfer kit
has reached the very low threshold. The
actual supply life remaining might vary. You
do not need to replace the supplies at this
time unless print quality is no longer
acceptable. After an HP supply has reached
the very low threshold, the HP premium
protection warranty for that supply has
ended. To continue printing, either replace the
transfer kit or reconfigure the product to
continue printing by using the
Manage
Supplies menu on the control panel.
Unsupported supply installed One of the print cartridges is for a different
HP product. If print quality is no longer acceptable,
replace the print cartridge.
Used supply in use One of the print cartridges has been
previously used. If you believe you purchased a genuine HP
supply, go to
www.hp.com/go/
anticounterfeit .
124 Chapter 7 Manage supplies ENWW