HP Color LaserJet Enterprise CM4540 MFP series - Manual (Page 235)

Set redial on error
The Redial on error feature sets the number of times a fax number will be redialed when an error occurs
during a fax transmission.
1. From the Home screen, scroll to and touch the Administration button.
2. Open the following menus:
● Fax Settings
● Fax Send Settings
● Fax Send Setup
● Fax Dialing Settings
3. Touch the Redial on error box to open the keypad.
4. Enter a value (0–9, default is 2) and then touch the OK button.
5. Touch the Save button.
Set redial-on-busy
The redial-on-busy setting selects the number of times (0 through 9) the fax accessory redials a number
when the number is busy. The interval between retries is set by the Redial Interval setting.
1. From the Home screen, scroll to and touch the Administration button.
2. Open the following menus:
● Fax Settings
● Fax Send Settings
● Fax Send Setup
● Fax Dialing Settings
3. Touch the Redial On Busy text box to display the keypad.
4. Enter a value (0–9, default is 3) and then touch the OK button.
5. Touch the Save button.
ENWW Set fax settings 215